Ding Tai Candle Making Kit Instructions

##Ding Tai Candle Making Kit Instructions
Making candles is a fun and easy way to create your own unique decorations or gifts. You can make all kinds of candles including jar candles, pillar candles, votive candles, tea-light candles and taper candles. With the Ding Tai Candle Making Kit, you can make your own special candles even if you’ve never done it before!

####Assembling The Kit
The first step is to assemble your candle making kit. Get out all the items in the kit and group it by category. Some items you should find include:

– Wax
– Wicks
– Jars or Containers
– Candle Molds
– Melting Pot

####Preparing Your Work Space
Next, it’s time to prepare your workspace. Gather all of your tools and supplies and set them up neatly. This can help to prevent accidents and reduce mess.



* Clear your workspace of any clutter
* Arrange your tools and equipment in a safe and convenient order
* Prepare a protective surface for work

####Melt The Wax
Once your workspace is prepared, you’re ready to melt the wax. Place the melting pot on the stove and turn the heat on low. Make sure the valve is set to closed while the wax is melting. When the wax is fully melted, remove the pot from the heat and turn the valve to open. You should now be able to pour the wax into the candle molds.

####Add The Wicks
With the molds filled, you can now add the wicks. Measure both the wick and mold and cut the wick to the appropriate length using scissors. Take each end of the wick and insert them into the base of the mold so that the wick hangs into the center.

READ
Show Videos Making 3 Inch Gel Candle Peach Pies

####Curing The Candles
Once the wicks have been inserted, it’s time to cure the candles. This is the process of letting the candles cool and harden. Place the molds in an area with low humidity and good air circulation and let sit for 6 to 8 hours. After that, your candles should be ready to enjoy!

####Conclusion
Making candles with the Ding Tai Candle Making Kit is a fun and easy activity that can be enjoyed by the entire family. Armed with these instructions, you’re now ready to start creating! Enjoy! #Ding Tai Candle Making Kit Instructions

Candle making is a fun and easy craft with attractive results! Using the Ding Tai Candle Making Kit, you can create beautiful candles in just a few steps. Read on for detailed instructions on getting the most out of your candlemaking kit.

##Gather the Materials

Your kit includes the following materials:

* Candle Wax

* Candle Wick

* Candle Mold

* Melting Pot

Additionally, you may want to have a few other supplies at hand, such as scissors, an oven mitt, and an old newspaper or drop cloth to protect your work surface from wax spills.

##Preparing the Wick

Before you start, be sure to measure and cut the wicks to the appropriate length for your candle molds. To ensure an even burn, make sure the wicks are the same length for all of your candles.



##Melt the Wax

Next, fill the melting pot with your candle wax. Then, place the melting pot in a double boiler, or put it on a stove top and turn the heat to medium-high. Begin stirring the wax with a spoon or spatula as it starts to melt. The ideal temperature is between 120 and 150 degrees Fahrenheit – check with a candy or deep fry thermometer to be sure.

READ
Votive Candle Making Kit

##Pour the Wax Into the Mold

Once the wax has reached the appropriate temperature, carefully pour it into the candle mold. Hold the wick taut in the center of the mold as you pour, and make sure there’s enough slack for the wax to reach the sides of the mold.

##Let the Wax Cool

Once you’ve finished pouring the wax, leave the mold to cool in a safe place. Be sure to keep it away from pets and small children. It should take approximately 1 hour to cool completely.

##Finishing Touches

Once the wax has solidified, release the candle from the mold and trim the wick to the proper length. Your candle is now ready to use or give away as gifts! Enjoy!



Send this to a friend