How Long After Making A Candle Can I Burn It


Most candles are made from flammable wax and wick, so it is essential for anyone who makes their own candles to be aware of candle burning safety guidelines. Through following proper procedures, not only will your own candles be safer to burn, but you can also prevent any accidents that may occur as a result of improper usage. To ensure the best results when burning your handmade candles, it is important to understand how long after making a candle the wax needs to cure before being lit.

Candle Types

There are a variety of different candle types available for both decorative and functional purposes. Soy, paraffin, beeswax, and coconut wax candles are all options for decoration as well as aromatherapy and spiritual use. All of these types of candles have different safety requirements when it comes to burning them.

Soy candles typically require no curing time at all since they are made with 100% soy wax. Paraffin wax candles can take between 2-3 days to cure depending on how long the wick was cutoff during the candle making process. Beeswax can also be ready in just a matter of days however, it is important to note that the higher the beeswax content, the longer the curing time may be required (up to 7 days). While coconut wax may require up to 10 days curing time due to its fragility.

Therefore, when it comes to deciding on how long after making a candle can you burn it will depend on what type of material it is made out of as each type has its own optimal cure times before they can be lit safely. It is important to note that no matter how long or short the cure time may be, never light an unfinished or uncured candle due to fire hazard risks associated with insufficient burn times.

Candle Preparation

It is important to prepare a candle carefully before use, to ensure the safety and optimal performance of your candle. To properly prepare the candle for a safe burn, the following steps should be taken:

1. Trim the wick: The wick should be trimmed to around ¼” before lighting. This prevents rapid or uneven burning.

2. Place on a heat-resistant surface: Placing your candle on a shallow plate or plate with raised edges will reduce excess wax spills during burning and make cleanup easier afterwards.

3. Allow the wax pool to form: To avoid unwanted tunneling, it is ideal to let the wax form an even pool across the entire surface of the container before extinguishing it. This might take approximately 3-4 hours depending on the size of your candle, and can be achieved by letting your candle burn for 1 hour intervals until an even layer forms.

Once these preparations have been completed your candle should be ready for burning! It is recommended that you do not leave any lit candles unattended and always ensure that candles are extinguished after two hours for optimal burning performance

Recommended Waiting Times Following Preparation

Standard Paraffin Candle: After making a standard paraffin candle, it is recommended to wait 12-24 hours before burning. This allows the wax to settle and harden.

Strong Hot Throw Fragrance Oil Supply Blends For Candle Making

Soy Candle: After making a soy candle, it is recommended to wait 24-36 hours before burning. This allows the wax to settle and harden fully.

Beeswax Candles: After making a beeswax candle, it is recommended to wait at least 48 hours before burning. Beeswax candles are slower to cool down than other types of candles, so they need an extended waiting period in order for the wax to settle and harden properly.

Gel Candles: After making a Gel Candle it is recommended to wait at least 24 hours before burning the candle for safety reasons. Gel candles need time for the layers to bond together correctly which can be impacted by heat from too soon of lighting or movement after preparation.

Factors Affecting Burning Times

Most candles should be allowed to cool and solidify for a few hours (or overnight) before being lit. This allows the molten wax to set and helps prevent the candle from becoming misshapen. Simple, no-frills paraffin wax candles typically require about three to four hours of cooling before they’re ready for burning. Similarly, soy or beeswax candles take between 36 and 48 hours to harden completely. Candles made with complex shapes can take even longer, depending on their size and the type of wax used.

The complexity of a particular shape will also dictate how quickly a candle can safely burn down. Smooth, taper-style candles consume heat more efficiently than candles that have been textured or struck through with intricate designs by hand. Candles with lots of detail can also tend to melt unevenly, producing tallow that gathers at the wick instead of dispersing throughout the candle structure properly.

Finally, warm ambient room temperatures increase the speed at which any given candle will burn. A candle in a room at 60°F may take twice as long to burn as the exact same candle in an 85°F room.

Additional Safety Tips

1. Always use in a well-ventilated, but not drafty room.

2. Make sure the flame is never left unattended and is extinguished when you are done burning the candle.

3. Keep candles at least 12 inches away from any combustible materials such as furniture, curtains, and books.

4. Be mindful of extinguishing candles due to decreased oxygen levels that can cause some unexpected reactions such as buildup of smoke or fumes released by the candle.

5. Never leave children or pets unsupervised near an open flame or burning candle, even if it is in its container.

6. Put out any smoldering wicks safely with a snuffer cup instead of blowing on the flames directly to avoid hot wax splatters or ashes being scattered throughout your space which could lead to a potential fire hazard.

Testing For Readiness

Typically, a candle needs to cure for 1-2 weeks before it is ready to be lit. During this time, the wax will harden and all of the fragrances and colorings can be blended together better. However, there are a couple of methods that you can use to test if your candle is ready to be burned and these involve both tactile and olfactory senses.

On the tactile side, an easy way to check if the candle is ready is by simply pressing on the surface with your finger. If you press down and you feel any give or indentation, then that means it’s not quite ready yet; however, if it’s hard as a rock “” then it should be good to go.

Candle Making Parties Johannesburg

When it comes to testing with olfactory sense, you can sniff around the perimeter of the candle “” carefully! This will help determine whether or not all of the fragrances have been distributed evenly throughout. If there are any oddly strong scents on one end but not the other, then it may have been mixed quickly and would need more time to mature properly before burning it .

Pros and Cons of Burning Candles

Pros of burning candles:

• They can create a pleasant, inviting atmosphere and can help to set the mood for any setting.

• Candles are often associated with relaxation and can provide spiritual symbolism or faith-based symbolism in certain settings.
• They can be a source of low light that may be ideal for reading or ambiance in darker rooms.
• Certain aromas from scented versions, such as those using essential oil, may offer an ingredient with beneficial properties such as helping to lift your mood or decrease stress hormones.

Cons of burning candles:
• The wax buildup from burning a candle over time can damage furniture and other surfaces if not wiped up quickly.
• Scented varieties may cause allergies or interfere with breathing difficulties in some people.
• Fire hazard ” if left unattended, burning candles pose a serious risk for fire therefore extra caution must be taken when lighting them.
• Can be expensive ” depending on the type of wax you purchase and the refills that may be necessary, burning candles on a regular basis can become costly over time.

Answer: Generally speaking, it is best to wait at least 24 hours after making the candle before you burn it. This ensures that the wax has completely cooled down and solidified to prevent any issues during the burn process (such as uneven heat distribution). It also gives the scent and color plenty of time to set so that you get full enjoyment out of the candle once lit.


It is important to always follow the manufacturer’s instructions when making candles and when lighting them. Generally, you should wait between 24-72 hours after making a candle before you light it for the first time. This allows the candle to set properly and helps to ensure that it will burn safely without any problems. It is especially important for larger candles as they may take longer to set and require more cooling time in between layers of wax. Additionally, make sure that your wick is trimmed appropriately prior to burning a candle and that you have used the right type of wax for your desired effect. Lastly, never leave a lit candle unattended and be sure to extinguish it completely when done before leaving the room or going to bed. Fire safety should always be top of mind whenever working with or lighting candles!

Send this to a friend