Make a Candle – Tips For Making Your Own Candle With Essential Oils
Do you want to make a candle? Like any craft, you have to practice, learn, test, investigate and then experiment, which is time consuming and expensive. Even if you’re just making a candle for yourself, it’s recommended you still take it quite seriously. You won’t make a good enough candle in a single day. It takes a month, two months, maybe even a year to learn how to make a candle perfectly.
To begin, let cool the wax. It’s best to let cool the wax sets on a table or a rack made of wooden blocks. Don’t let it sit in a pan. If the wax sets hard, the candle flame can damage them.
Take the wax from the container and set it in a clean bowl. The container should be as clean as you can get it. Rinse the wax thoroughly under running water. A tablespoon of baking soda added to one pint of water and stirred together can do the trick.
Make sure the container isn’t contaminated or filled with air. Pour at least a quarter cup of the mixture into the mold or container. If you’re going to make a candle from scratch, you need to make sure the ingredients are mixed well and there aren’t any air pockets or air bubbles in the melted wax. Once the wax has melted completely, remove it from the mold or container and let cool. Don’t allow it to sit for more than about an hour. Let it sit in a cool dark place to complete the rest of the procedure.
When you’re done, you’ll have a great candle. Depending on how thick you want your candles to be, you will need to add either wicks or jars. Typically, candles that are sold in stores have wicks attached to the bottom so they can be removed for cleaning and dipping. There are many different types of wicks, such as soy, Jacuzzi, tallow and even resin.
Candle wicks come in different densities, so you may want to check to see if the candle wax is the same density in the wick as it is in the jars per pound. One to three tablespoons per pound is a good rule of thumb. Jars per pound should be no less than five ounces. If the candles you make are going to have scents, choose one with a high concentration of floral oils. Other than that, the formula is the same.
Once you have the wax and the wicks in place, add your fragrance and leave it to set for at least four hours. This allows your candle to scent your home before you light it. At the very least, you will need a container to store them in, but you may also want to consider investing in glass jars. Depending on where you plan on storing your candle, you will want to make sure it sits in a cool and dark place. Do not allow your candle to sit in direct sunlight or any area that is directly exposed to heat.
After your candles have finished burning, make sure you scrape out the burned wax from your container. If you do not scrape it out, the candle-making process will weaken the wax and result in weaker candles. You may even find yourself purchasing wax for next projects. Although candles can cost more to make than you might expect, they are worthwhile, as they last a lifetime.
There are several different types of candle making supplies you can purchase. If you plan on making soy candles, for example, you will need to purchase some type of protective jar to store your finished products. Some candle making supply stores sell containers made specifically for soy wax, and you can purchase these as well. The wide variety of supplies available can make candle making seem overwhelming, but with a bit of planning and research, you should be able to find everything you need.
Once your wick has reached the temperature to burn, you will want to insert it into your boiler. Using a metal bowl placed in the bottom of your boiler will help keep it from overheating, as will wrap the wick in a towel or newspaper. Before lighting, be certain to set your flame to the same temperature as your wax. If you have never lit a candle before, this can be intimidating, but with a little practice, you should be able to get it under control.
Once your candle has burned, remove it from the heat source and allow it to cool. Once it has cooled, you will then be able to remove the wick from its package and place it into your candle mold. Place your wick in, pour in your desired amount of water and let it sit until the liquid is dissolved. You may also want to stir the melted wax prior to placing it inside the mold, which will help it melt into the proper shape and shade.