Making Rock Oil Candles
Rock Oil Candles are an eco-friendly, fun and easy craft that can bring a unique, rustic look to any home. Making your own candles using rocks and oil is a great way to save money- and it’s surprisingly easy to do.
Here’s what you’ll need:
- Rocks- Any rocks that are non-porous could be used for this craft. Rocks with a flat bottom are easiest and look the best. For example, flat river stones, beach stones or agates.
- Candle Oils- You can find premade scented or unscented oils at your local craft store, or you can make your own by mixing fragrance or essential oils with a neutral base oil such as soybean or almond oil.
- Cotton Wicks- You will need long pieces of cotton wick to put in the oil.
Step One: Choose Rocks
Start by finding the perfect rocks for your candles. Find rocks that are flat and non-porous and make sure to wash them off before you start.
Step Two: Inserting the Wick
Once you have chosen the rocks, it’s time to insert the wick. Choose a wick that is slightly wider than the hole at the top of the rock. Push the wick through the hole and make sure it is secure.
Step Three: Fill with Oil
Now it’s time to fill the rocks with oil. Steady the rock with one hand while you pour the oil in with the other. Make sure the oil is filled up to the top, but not over the edge.
Step Four: Let it Set
Once the oil is in the rock, set it aside and let it set for a few hours. This will allow the oil and the wick to combine. Once the oil has set, trim the wick to whatever size you prefer and your candle is ready to use.
That’s all there is to it! Making Rock Oil Candles is a fun, easy, and eco-friendly craft that will bring a unique, rustic look to any home. Go ahead and start crafting- and enjoy the glow of the flame!
Making Rock Oil Candles
Candle making is an ancient craft and the use of rock oil candles is one that has been appreciated for countless centuries. Rock oil candles are considered to be a renewable energy source and they are a great way to create ambiance while helping reduce your carbon footprint! Here is a simple guide to making rock oil candles:
Materials
You will need:
- A piece of rigid ceramic of any shape
- Rock oil
- A length of ​wick
Instructions
- The first step is to make a hole in the ceramic piece. This will be used for the wick. The best way to make this hole is to drill it but you could also use a heated nail, heated screwdriver bit or even a Dremel tool.
- Once you have created the hole, feed the wick through it so that the top of the wick is visible through the hole.
- The next step is to fill the ceramic piece with rock oil. Fill it until it is almost full and make sure that the wick is fully submerged in the oil.
- Wait for a few minutes then light the wick with either a lighter or a match. Make sure you are in a well-ventilated area as the fumes can be strong.
- Once the candle is lit, the flame should burn steadily. Adjust the wick and flame as necessary.
- When the candle has finished burning, wait for it to cool down before handling it. You can also top off the rock oil level if it has gone down.
Safety Tips
- Always make sure to place the candle on an even, heat-resistant surface. Rock oil has a high burning point but you want to make sure that the area underneath your candle isn’t flammable.
- Never leave the candle unattended. You should always be present while the candle is burning, or place it in an area where you can keep an eye on it.
- Keep the wick trimmed. Make sure to use scissors or nail clippers to trim the wick to about ¼ inch before you light it.
Making rock oil candles is an easy and rewarding project that can help fill your home with a beautiful and natural light. With the proper safety precautions, you can enjoy this craft for years to come!
Welcome to my candle making blog! In this blog, I will be sharing my tips and tricks for making candles. I will also be sharing some of my favorite recipes.
