Michaels Wicks For Making Candles

Introduction

Michaels Wicks, founded in 1978, is a family-owned business that is renowned for providing some of the best materials for making candles. For over 40 years, Michaels Wicks has been crafting the finest waxes and wicks for candle manufacturing. Our wicks are made from natural cotton and feature a hardened paper core, perfect for producing superior burning properties. We also provide a variety of sizes, ensuring there is an option to fit any kind of container or design. From hand-poured candles to large-scale commercial production lines, Michaels Wicks provides the materials necessary for all sorts of candle makers.

Benefits of using Michael Wicks

Michael Wicks are perfect for the experienced candle maker or for a beginner because of their reliable performance and easy accessibility. With traditional cotton wicks, some users complain about tunneling, mushrooming, and an uneven burn. These challenges can be avoided by choosing Michael Wicks as they are made from a special blend of paper, cotton, and zinc core that is designed for maximum performance. It ensures that your candles burn evenly and cleanly with controlled flame size throughout the burning cycle.

Rather than traditional cotton wicks, which may require special treatment to eliminate their tendency towards accuracy issues due to their fibrous texture when wet, Michael Wicks require significantly less maintenance thanks to their high quality construction materials. Furthermore, these wicks facilitate faster setting time after pouring wax over them, resulting in a shortened production period with stable candles more quickly than compared with other types of synthetic or cotton-based wick cores. Additionally, Michael Wick products are very cost effective due to the fact that each cross section should last up to 3x longer than ordinary candlewicking material due to its enhanced water repellency nature. Lastly, Michael Waxes have no discernible smoke when properly in use; this lack of smoky build up leads to fewer problems with burning residue on either the container or nearby walls during usage.



Types of Michael Wicks

The most popular types of Michael Wicks for candle making are flat braid wicks, zinc core wicks, and paper core wicks.

Flat braid wicks are composed of two flat fibers twisted together to form a flat strand that can be used in votive candles or jar candles. These wicks offer efficient burning and hold large amounts of wax.

Zinc core wicks typically have an internal metal support structure ” usually either zinc or tin ” that helps the core stay rigid while burning through the liquid wax when lit. These wicks generally create larger and longer-lasting flames than other types, allowing them to better reach down far into the container and burn evenly throughout the melting process. Zinc-core wicks also work well with containers with higher temperatures, such as gel candles or paraffin wax candles.

READ
Candle Making Recipes - What Ingredients Do You Need?

Paper core wicks tend to use a paper wrapped around a cotton core that is coated with an additional level of wax coating along its length, usually beeswax or vegan blends. These all-natural wick materials provide more control, leaving you with finer flames that don’t get out of hand, especially in fragrance oil blends and solid colored dyes like those found in palladium melts or soy wax melts.

Choosing the right type of Michael Wick for your candle making project is dependent on several factors, such as the size of your candle container, amount of scent and dye added to your wax blend, whether you’re working indoors or outside in changing weather conditions, among many others. It’s best to refer to resources specific to each type of candle material and/or a knowledgeable Michaels employee who can guide you through each step of your project properly!

Wick Size

When selecting a wick size for candles, there are several factors that should be considered such as the wax type and fragrance load, candle diameter as well as the encasement used – such as glass jars or silicone molds. Typically it is best to use wicks that are sized according to your container diameter (for example, a 6 oz. jar should have an 8″ wick). However, when experimenting with different combinations of waxes and fragrances it can be helpful to begin with the suggested size of wick listed then make adjustments accordingly.

For instance, if one was using soy wax in a larger container with a heavy fragrance load, it would be advised to move up one or even two sizes in the recommended wick selection. Alternatively, if thin pillars or containers under 4 oz were being poured using paraffin wax a smaller wick may be necessary. Additionally, care should be taken to ensure that any flat braid and twisted cored wicks do not fray after burning by using either stiffening formula or special clip collars attached at the base of the candle base.

Ultimately it is up to each individual candle maker to find their preferred combination for successful performance through experimentation & trial & error. It is important to ensure safety protocols when working with unprotected flames as well as proper ventilation when melting wax around fragrances that may cause irritation or allergies over prolonged periods of time.

Candle Soot

When using Michael Wicks for making candles, the amount of soot released in the air depends on the size of wick used. For example, when using a larger diameter wick like an LP or an SL style wick, it is more likely to cause a higher emission of soot due to their larger flames. Using smaller sizes such as an 8mm Zinc core will create a much smaller flame and reduce the amount of smoke created significantly. To ensure that soot emission is kept low, use low smoking fuels such as paraffin wax or higher melting point wax with lower fragrances where possible. Another way to reduce soot is to work in well-ventilated areas as this will allow any smoke formed to disperse sooner and reduce its visibility in the atmosphere.

READ
Wax Blend For Candle Making

Adhering the Wick to the Container

When adhering the wick to the container, it is important to ensure that your hands are steady in order to keep the wick straight and ensure a firm grip. First, remove the adhesive sticker from the metal disc on top of the wick and attach it to the bottom center of the container. To do this, press down firmly and hold for 10 seconds. Next, gently lift up the metal disc with one hand while using your other hand to firmly flatten out the strands of cotton around it evenly. Lastly, make sure that all of the strands are properly held between two hands and press downwards to make sure that they are secure in place at the bottom of your container.

To help illustrate this process, provide images of each step involved so readers can have a visual aid when attempting their project. For those who prefer more detailed instructions, you might also consider adding helpful videos alongside these images in order to give readers a more in-depth look into best practices when adhering a wick to a container.

Final Thoughts

Michael Wicks for making candles provides a great resource for the avid candle-maker. Here are some tips on how to make the most out of your Michael Wicks:

1. To ensure maximum candle burn time and beauty, always use metal or glass containers that can withstand high temperatures when melting your wax with Michael Wick’s ingredients.

2. Properly maintaining your wicks between uses is essential in order to keep them in peak condition and avoid fraying or crumbling when lit. When not in use, keep them away from heat and humidity and store appropriately with a tight fitting cap or lid on the container.

3. For cleanest cuts, pre-measure length you need prior to cutting Michael Wick’s wick strands into small pieces for the specific candle-making needs. Use sharp scissors for more accurate cuts and minimal waste!



4. It’s recommendable to let each layer of wax dry completely before adding another layer – this will help strengthen the overall construction of candle and achieve longer burn times.

5. If a wick refuses to stay centered during burning, it may be useful to insert a small ceramic disc at the base (bottom) of the container, holding the end of the wick firmly in place and helping maintain an even burn pattern and extended life cycle of your masterpiece.



Send this to a friend